MLB-E4208-14-G-F
PRICE: IDR 15.405.500 Buy
MLB-E4208-14-G-F is 10/100M Gigabit Ethernet switches, providing 14 10/100M Gigabit Ethernet ports to update the existing network to 10/100M Gigabit speed infrastructure. A full Gigabit network provides higher overall throughput than a legacy fast Ethernet network, and reduce the response time for timing sensitive applications that may mix of video, voice and data in its traffic pipe.
Features
- Provides 10 Gigabit copper ports plus 4 SFP ports 100FX or 1000BaseF (SX/LX/LH)
- 9K jumbo frames
- L2 wire-speed switching engine
- 8K MAC forwarding addresses
- Network redundant LACP, STP, RSTP & MSTP, Flash Ring, Scale Chain (< 20 ms)
- Port-based/tag-based VLAN, IEEE 802.1ad/QinQ VLAN, add/remove VLAN tags
- Multicasting supports IGMP v1/v2, proxy & snooping
- Multicast/Broadcast/Flooding Storm Control
- IEEE802.1x access control
- Per VLAN mirroring
- Dual power input (12~58VDC) & reverse power protection
- DIN-rail and wall mounting option
- Supports Gigabit
Specs
| Ethernet | |
| Operating Mode |
Store and forward, L2 wire-speed/non-blocking switching engine |
| MAC Addresses | 8K |
| Jumbo Frames |
9K Bytes |
| Copper RJ45 Ports | |
| Speed |
10/100/1000 Mbps |
| MDI/MDIX Auto-crossover | Supports straight or cross wired cables |
| Auto-negotiating | 10/100/1000 Mbps speed auto-negotiation; full and half duplex |
| Ethernet Isolation | 1500 VRMS 1 minute |
| SFP (Pluggable) Ports | |
| Port Types Supported |
SFP (pluggable) ports 100/1000BaseSFP slot Supports 100FX Supports 100/1000BaseT SFP transceiver |
| Support 100FX |
LC typically for fiber (depends on module) |
| Support 100/1000BaseT SFP transceiver |
Typical 50 or 62.5/125 μm for multimode (mm) Typical 8 or 9/125 μm for single mode (sm) |
| Network Redundancy | |
| Flash Ring |
Link loss recovery < 20 ms. Single & multiple rings supported |
| Scale Chain | Link loss recovery < 20 ms. |
| Spanning Tree Protocol |
IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP |
| Port Trunk with LACP | Static trunk or dynamic via LACP (Link Aggregation Control Protocol) |
| Bridge, VLANs & Protocols | |
| Flow Control | IEEE 802.3x (full duplex) and back-pressure (half duplex) |
| Max VLANs | 256 |
| VLAN Types |
Port-based VLANs IEEE 802.1Q tag-based VLANs IEEE 802.1ad double tagging (Q in Q) |
| Multicast Protocols |
IGMP v1, v2 with up to 255 multicast groups IGMP snooping and querying Immediate leave and leave proxy Throttling and filtering |
| LLDP | IEEE 802.1ab Link Layer Discovery Protocol (LLDP) |
| Traffic Management & QoS | |
| Priority |
IEEE 802.1p QoS |
| Number of Queues Per Port |
4 |
| Scheduling Schemes | SPQ, WRR |
| Traffic Shaper |
Port-based shaping |
| Security | |
| Port Security |
IP and MAC-based access control IEEE 802.1X authentication network access control |
| Storm Control | Multicast/Broadcast/Flooding Storm Control |
| Management | |
| User Management Interfaces |
Cisco-like CLI (Command Line Interface) WEB-based management SNMP v1, v2c, v3 Telnet (5 sessions) |
| Management Security |
HTTPs, SSH Radius client for management |
| Upgrade & Restore |
TFTP/FTP for configuration import/export TFTP/FTP for firmware upgrade |
| Diagnostic |
Syslog Per VLAN mirroring Ethernet copper connection diagnostic tool SFP with DDM (Digital Diagnostic Monitoring) |
| MIBs |
RFC 1757 RMON 1, 2, 3, 9 RFC 2674 Q-Bridge MIB RFC-1213 MIB-II RFC-1493 Bridge MIB RFC 2233 IF MIB |
| DHCP | Client, Server, Relay, Snooping, Option 82 |
| NTP / SNTP | Yes |
| System Status |
Device info/status Ethernet port status PoE status |
| PoE Management |
Scheduling; power control PoE PD power consumption |
| Power | |
| Power Input | Redundant input terminals |
|
Input Voltage Range
|
12~58VDC |
| Reverse Power Protection | Yes |
|
Transient Protection |
> 15,000Watt peak |
| Indicators | |
| Power Status Indication | Indication of power input status |
|
Ethernet Port Indication |
Link & speed |
| Environmental & Compliances | |
| Operating Temperature Range | -40~+75°C (cold startup at -40 °C) |
| Storage Temperature Range | -40~+85°C |
| Humidity (Non-condensing) | 5~95% (non-condensing) |
| Vibration, Shock & Freefall |
Vibration: IEC60068-2-6 Shock: IEC60068-2-27 Free Fall: IEC60068-2-32 |
| Certification Compliance | CE/FCC/UL-508; EN-50121-4 |
| Electrical Safety |
UL508/CSA C22, EN61010-1, CE |
| EMC |
FCC Part 15, CISPR 22 (EN55022) class A IEC61000-4-2, -3, -4, -5, -6 (Level 3) |
| RoHS and WEEE | RoHS (Pb free) and WEEE compliant |
| MTBF | > 25 years |
| Mechanical | |
| Ingress Protection | IP30 |
| Installation Option | DIN-Rail mounting, wall mounting |
| Dimension (L)x(W)x(H) | 154x65x108mm |
| Weight | 120g |