MLB-E4216H-14-G-P-F
MLB-E4216H-14-G-P-F
PRICE: Call
MLB-E4216H-14-G-P-F is a Managed Gigabit Ethernet switch, providing 8 10/100Base-T PoE PSE ports, 2 10/100Base-T ports and 4 100BaseSFP ports. It complies with IEEE 802.3at standard and able to deliver up to 30/60 watts power per port along with data on standard Ethernet cabling. The switch can be used to power any IEEE 802.3af/at compliant PoE PD devices with PoE power management feature, which eases the deployment effort of planning PoE power budget and eliminates the need for additional wiring to reach power source.
Features
- Provides 8 10/100/1000 Base-TX PoE ports, 2 10/100/1000 Base-TX, plus 4 100FX/1000Base FSFP slots
- IEEE 802.3af 15.4W/IEEE 802.3at 30W (2-pairs) & 60W (4-pairs) High Power PoE
- Total PoE power budget: Max. 240W PSE power delivered
- 9K jumbo frames
- L2 wire-speed switching engine
- 8K MAC forwarding addresses
- Network redundant LACP, spanning tree STP, RSTP & MSTP, and quick ring fail-over protection (< 20 ms)
- Port-based/tag-based VLAN, IEEE 802.1ad/QinQ VLAN, add/remove VLAN tags
- Multicasting supports IGMP v1/v2, proxy & snooping
- Multicast/Broadcast/Flooding Storm Control
- IEEE802.1x access control
- Per VLAN mirroring
- CLI/Web/SNMP management interfaces
- PoE PSE power management & PD power consumption monitoring
- Dual power input & reverse power protection
- DIN-rail and wall mounting option
- Supports Gigabit
Specs
| Ethernet | |
| Operating Mode |
Store and forward, L2 wire-speed/non-blocking switching engine |
| MAC Addresses | 8K |
| Jumbo Frames |
9K Bytes |
| Copper RJ45 Ports | |
| Speed |
10/100/1000 Mbps |
| MDI / MDIX Auto-crossover | Supports straight or cross wired cables |
| Auto-negotiating | 10/100/1000 Mbps speed auto-negotiation; full and half duplex |
| Ethernet Isolation | 1500 VRMS 1 minute |
| SFP (Pluggable) Ports | |
| Port Types Supported |
SFP (pluggable) ports 100/1000Base SFP slot Supports 100FX SFP transceiver Supports 100Base-T SFP transceiver |
| Fiber Port Connector |
LC typically for fiber (depends on module) |
| Optimal Fiber Cable |
Typical 50 or 62.5/125 μm for multimode (mm) Typical 8 or 9/125 μm for single mode (sm) |
| Network Redundancy | |
| Flash Ring |
Link loss recovery < 20ms Single & multiple rings supported |
| Scale Chain | Link loss recovery < 20ms |
| Spanning Tree Protocol |
IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP |
| Port Trunk with LACP | Static trunk or dynamic via LACP (Link Aggregation Control Protocol) |
| Bridge, VLANs & Protocols | |
| Flow Control | IEEE 802.3x (full duplex) and back-pressure (half duplex) |
| Max VLANs | 1024 |
| VLAN Types |
Port-based VLANs; MAC-based VLANs IP subnet-based VLANs Protocol-based VLANs IEEE 802.1Q tag-based VLANs RADIUS-assigned VLAN IEEE 802.1ad double tagging (Q in Q) |
| Multicast Protocols |
IGMP v1, v2 with up to 255 multicast groups IGMP snooping and querying Immediate leave and leave proxy Throttling and filtering |
| LLDP | IEEE 802.1ab Link Layer Discovery Protocol (LLDP) |
| Traffic Management & QoS | |
| Priority |
IEEE 802.1p QoS |
| Number of Queues Per Port |
8 |
| Scheduling Schemes | SPQ, WRR |
| Traffic Shaper |
Port-based shaping |
| RADIUS QoS | RADIUS-assigned QoS Class |
| Alarm | |
| Alarm relay output | Relay output with current carrying capacity of 0.5A @ 24VDC |
| Alarm Notificaiton | Configurable alarm profile to enable Alarm LED, alarm relay & SNMP traps |
| Security | |
| Port Security |
IP and MAC-based access control IEEE 802.1X authentication Network Access Control |
| Storm Control | Multicast/Broadcast/Flooding Storm Control |
| Management | |
| User Management Interfaces |
Cisco-like CLI (Command Line Interface) WEB-based management SNMP v1, v2c, v3 Telnet (5 sessions) |
| Management Security |
HTTPs, SSH Radius client for management |
| Upgrade & Restore |
FTP for configuration import/export FTP for firmware upgrade |
| Diagnostic |
Syslog Per VLAN mirroring Ethernet copper connection diagnostic tool SFP with DDM (Digital Diagnostic Monitoring) |
| MIBs |
RFC 1757 RMON 1, 2, 3, 9 RFC 2674 Q-Bridge MIB RFC-1213 MIB-II RFC-1493 Bridge MIB RFC 2233 IF MIB |
| DHCP | Client, Server, Relay, Snooping, Option 82 |
| NTP / SNTP | Yes |
| System Status | Device info/status, ethernet port status, PoE status |
| PoE Management |
Scheduling, power control, PoE PD power consumption |
| Power | |
| Power Input | Redundant input terminals |
|
Input Voltage Range Total PoE Output Power Budget Per Switch |
44~58VDC (50~58VDC for better PoE performance) 240W |
| Max PoE output power budget per port | 30W (Max. 60W for port 1 & port 2) |
| PoE PSE port output power management | Scheduling; power control; PoE PD power consumption monitoring |
| Reverse Power Protection | Yes |
|
Transient Protection Power Consumption |
> 15,000 watts peak Max. 14W without PD connected Max. 265W with 240W PSE power delivered |
| Indicators | |
| Power Status Indication | Indication of power input status |
|
Ethernet Port Indication PoE Status |
Link & Speed Indication of PoE power applying |
| System Alarm | Profile-defined system Alarm |
| Environmental & Compliances | |
| Operating Temperature Range | -40~+75 °C (cold startup at -40 °C) |
| Storage Temperature Range | -40~+85 °C |
| Humidity | 5~95% RH (Non-condensing) |
| Vibration, Shock & Freefall |
Vibration: IEC60068-2-6 Shock: IEC60068-2-27 Freefall: IEC60068-2-32 |
| Certification Compliance | CE/FCC |
| Electrical Safety |
CSA C22, EN61010-1, CE |
| EMC |
FCC Part 15, CISPR 22 (EN55022) class A IEC61000-4-2, -3, -4, -5, -6 |
| RoHS and WEEE | RoHS (Pb free) and WEEE compliant |
| MTBF | > 25 years |
| Mechanical | |
| Ingress Protection | IP30 |
| Installation Option | DIN-rail mounting, wall mounting |
| Dimension | 77x154x128mm |
| Weight | 1410g |
**harga tidak mengikat, sewaktu-waktu dapat berubah tanpa pemberitahuan terlebih dahulu
