xPico IAP
xPico IAP
PRICE: Call
Serial Interface
- Two Serial CMOS Ports* (3.3V, 5V tolerant)
- 300 to 115.2 kbps for Modbus enabled serial port
- Control signals: DTR/DCD, RTS/CTS (Port 1 only)
- Flow control XON/XOFF
- Programmable I/O: 8 PIO pins (software selectable)
- Lantronix Modbus application
- Modbus TCP, Modbus ASCII, Modbus RTU. Master and Slave mode support
* Modbus can only be operated on one serial port at a time.
Network Interface
- Interface: Ethernet 10Base-T or 100Base-TX (Auto-sensing)
Network Protocols
- TCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS, SNMPv1, TFTP, Modbus TCP, ASCII, RTU
Management and Control
- SNMP, Telnet, Serial
- Field upgradable firmware
Architecture
- Based on the DSTni-EX Enhanced 16-bit x86 Architecture
- Memory: 256KB SRAM, 512KB Flash
Included Software
Power
- Input Voltage: 3.3VDC
Physical Interface
- 40-pin Board-to-Board SMT Connector
Environmental
- Operating Temp: -40° to +85° C
- Storage Temp: -40° to +85° C
- Relative Humidity: 0% to 90% non-condensing
Packaging
- Dimensions: 24mm (L) x 16.5mm (W) x 5.64mm (H)
- Weight: 2.5g
**harga tidak mengikat, sewaktu-waktu dapat berubah tanpa pemberitahuan terlebih dahulu
